Installation and t
echnical data
Page 13
Evolution Plus technical data
Coffee bean hopper
1.3 kg per grinder
(optional: lockable)
Grounds container
50 cakes
(optional: grounds ejection)
Boiler volume
small boiler: coffee 1.2 l 1.0 MPa (145 psi)
large boiler: hot water/steam 1.6 l 0.2 MPa (29 psi)
Electrical connection
200 V 3 L PE 4 kW 50/60 Hz Fuse: 20 A
200 - 208 V 1 L N PE 2.6 kW 50/60 Hz Fuse: 16 A
230 - 240 V 1 L N PE 3.2 kW 50/60 Hz Fuse: 16 A
230 - 240 V 1 L N PE 5.2 kW 50/60 Hz Fuse: 30 A
380 V 2 L N PE 5.2 kW 50/60 Hz Fuse: 16 A
400 V 2 L N PE 5.2 kW 50/60 Hz Fuse: 16 A
208 V 2 Ph PE 4.8 kW 50/60 Hz Fuse: 30 A Current: 24 A
Electric cable
l = 1800 mm (70.86")
Supply line
Metal hose with union nut G3/8", l = 1500 mm (59")
Waste-water hose
d = 16 mm (0.63"), l = 2000 mm (75.75")
not permanently attached to the drain (vented)
Noise emission
< 70 dB (A)
Weight
1M 46 kg 2M 50 kg
Cold water connection
G3/8” outside thread
Water pressure
80 - 800 kPa (0.8 - 8.0 bar or 11.6 - 116 psi)
Water shut-off
with check valve and filter
Water hardness
max. 70 mg CaO/1 l water (7 dH, 13 °fH)
Chlorine content
max. 0.1 mg/l (0.1 ppm)
Ideal pH value
7
Funnel
d = 50 mm (1.97") with siphon
Drain pipe
dmin = 1"
Ambient conditions
Humidity: max. 80 %
Ambient temperature: 10 - 35 °C (50 - 95 °F)
Preparations
t
The power connection for the coffee machine must be protec-
ted by a ground fault circuit interrupter (GFCI).
t
Each terminal of the power supply must be able to be interrup-
ted by a switch.
t
The water connection must have a shut-off with a check valve
and filter and must meet the requirements of the technical data.
t
The water for the preparation of coffee should always be fresh,
oxygenated and rich in minerals.
t
If your Evolution Plus has an electrical connection other than
the one described in the table opposite, you will have received
additional information regarding the installation with your order
confirmation.
Installation
You must have completed these preparations before one of our
service technicians can install Evolution Plus for you.
One of our service technicians will install your Evolution Plus and
put them into operation for the first time. The technician will walk
you through the basic functions.
Your Evolution Plus must be properly installed so that you can operate it correctly—one of our service technicians will
do that for you. You'll have to take care of a few things first. You'll find the preparations for problem-free enjoyment of
your coffee machine here
Installation and technical data
Installation