1T 310'783 Operating Manual
Ecolino / Ecopower Milk System
Erstellt: 07.05.2002 Rev.: C SL: 20'987 BJC
page 43
4. Insert the Cash Card into the card reader
cash card
The user is asked to confirm that the Cash Card is to
delete? "-"
be cleared. If this is not the case, remove the Cash Card
and insert the Load Card into the card reader.
5. Press the "-" key
delete cash card
The credit on the Cash Card is cleared
...busy...
6. Remove the Cash Card
remove card
7. If further Cash Cards are to be cleared, steps 4 to 6
insert card
must be repeated
cash/load à
8. Insert the Load Card into the card reader
delete chip cards
perform "shift"
6.1.6.4 Chip Card Loads
The total loaded amount is displayed and can be cleared.
1. Insert the Load Card into the card reader
2. Press the "+" or "-" key until the parameter is obtained
chip cards loading
turn-over
XX.XX
If it is intended to clear the total oaded amount, the following procedure must be adopted:
3. Press the Shift key
delete chip cards
delete? "-"
4. Press the "-" key so that the total loaded amount is
chip cards loading
cleared
turn-over
00.00
5. By pressing the "+" or "-" key, the Management level
is reached.
6.1.6.5 Chip Card Information
If a Cash Card is lost, the owner can be found by means of the card number. This of course assumes
that all card data and users are registered.
1. Insert the Load Card into the card reader
2. Press the "+" or "-" key until the parameter is obtained
info chip cards
perform "shift"
3. Press the Shift key
remove card
delete? "-"
insert card
cash/load à
