Franke 2000 03 01, Инструкция по установке и эксплуатации

Страница: 4 / 12

4
18
-05
.5
3
9b-GB.fm
3. Technical Specifications
4. Scope of Delivery
5. Dimensions
6. Installation Example
7. Assembly Instructions
☞
Before installing the drinking fountain, use the special bit (included) to unscrew the
bottom plate.
☞
To protect the tiles, use masking tape when marking and drilling. Drill at low speed.
7.1 Mark the boreholes for the hook-in strip according to the dimensions.
☞
Depending on the composition of the wall, special wall dowels may have to be used
(not included).
7.2 Drill according to the markings.
Insert the dowels.
☞
Depending on the composition of the wall, suitable fastening material may have to be
used (not included).
7.3 Use Phillips screws to fasten the the hook-in strip.
7.4 Hook in the drinking fountain.
7.5 Mark the other drill holes.
7.6 Drill according to the markings.
Insert the dowels.
7.7 Mount the filter discharge valve with the screw and anti-twist feature.
7.8 Place the valve on the drinking fountain with the pin lined up to the borehole.
7.9 Secure with the circlip, the rubber washer and the nut.
Minimum flow pressure: 1 bar
Calculation flow rate: 2.4 l/min (0.04 l/s)
Volumetric flow: 2.4 l/min at 3 bar flow pressure
Item Description
1 Drinking fountains
2 Fitting
3 Drain valve
4 Corner valve, connecting hose
5 Odour trap
6 Set for wall mounting
Installation and Operating Instructions