Franke 2000 03 01, Инструкция по установке и эксплуатации

Страница: 3 / 12

3
18
-05
.5
3
9b-GB.fm
0 English
76 12982 000010
........ Flow rate regulator 9 l/min
Please refer to the graphics in the German Installation and Operating Instructions.
0 Table of Contents
1. Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Important Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4. Scope of Delivery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5.
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
6. Installation Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
7.
Assembly Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
8. Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
9. Adjusting the Flow Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
10. Fault Correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
11. Replacement parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1. Warranty
Liability is accepted according to the General Terms and Conditions of Business and
Supply.
Use original replacement parts only!
2. Important Notes
• Installation, commissioning and maintenance are to be performed only by a
qualified technician according to the instructions provided.
• The installation is to be performed in compliance with local conditions, relevant
regulations (e.g.: VDE 0100), nationally applicable accident prevention regulations
(e.g.: VBG 4) and the acknowledged rules of technology. In particular, the system
must be incorporated into the equipotential bonding using the threaded bolts
provided on the housing.
• Legal requirements and the engineering connection regulations of the local water
supply companies must be complied with.
• Before assembling and installing the equipment, flush the supply pipes in
accordance with DIN 1988!
• Operate this valve only in conjunction with the correct grit filters and return flow
inhibitors.
• Use suitable, non-aggressive cleaning agents in a proper manner, and rinse with a
lot of water after use. High-pressure cleaners must not be used for cleaning.
• Follow the cleaning instructions for stainless steel 18-05.427.
• All rights reserved to make technical alterations.