![background image](http://html1.mh-extra.com/html/franke/110-0044-369/110-0044-369_user-manual_2327853005.webp)
RESET METAL Grease filter
These can be washed in the dishwasher, and need to be cleaned whenever the FF sign appears on the display or at least once every 2 months use, or more frequently if
use is particularly intensive. Resetting the alarm signal
• Turn the Lights and the Suction motor off, then disable the 24h func-tion, if enabled.
• Press button E until the display turns off. Cleaning the Filters
• Open the Comfort Panel by turning the knobs.
• Remove the Filters one at a time, pushing them towards the back of the unit and at the same time pulling downward.
• Wash the Filters without bending them, and leave them to dry com-pletely before replacing. (If the surface of the filter changes colour as time goes by, this will have
absolutely no effect on the efficiency of the filter itself.)
• Replace, taking care to ensure that the handle faces forwards.
C
harcoal filter
This filter cannot be washed or regenerated. It must be replaced when the EF appears on the display or at least once every 4 months. Activation of the alarm signal
• In the recycling version hoods the filter saturation alarm must be activated during the instal-lation or later.
• Switch off the hood and the lights.
• Disconnect the hood from the mains supply.
• When restoring the connection press and hold B-key.
• When releasing the key two rotating rectangles appear on the display.
• Within 3 seconds press the B-key until a flashing confirmation appears on the dispaly:
• 2 flashes with EF - charcoal filter saturation alarm ACTIVATED
• 1 flash with EF - charcoal filter saturation alarm DEACTIVATED.
CHANGING THE ACTIVATED CHARCOAL FILTER Resetting the alarm signal
• Turn the Lights and the Suction motor off, then disable the 24h func-tion, if enabled.
• Press button E until the display turns off. Changing the Filter
• Open the Comfort Panel by turning the knobs.
• Remove the Metal grease filters. • Remove the saturated Activated charcoal filter, using the hooks pro-vided.
• Fit the new Filter, hooking it into place.
• Replace the Metal grease filters. • Close the Comfort Panel by turning the knobs.