A
Carriage Closed: Press for approx. 1.5 Seconds to open the carriage, turn the lights on, turn the Fans
on and start the Motor at the last speed set. Carriage Open: Press briefly to turn the Motor off or to
start it at the last speed set. Press for 1.5 seconds to turn the Motor and the Fans off and to close the
carriage.
Displays the set speed. With the Fans on, the Display on
the left shows an animation.
b
Press briefly to decrease the working speed. Press for 2 Seconds to turn the Fans off. Once the Fans
are turned off they will turn on automati-cally every time the Carriage is extracted, or when the
Working speed is increased.
C
Increase the working speed.
D
Intensive function: Can only be activated with the Carriage open at any speed and with the Motor
turned off. It has a timer set to 10 minutes, after which the system will return to the speed set before.
Suitable to deal with maximum levels of cooking fumes. When the function is enabled/disabled, the
Fans are en-abled/disabled. Cannot be enabled when Delay or 24H are on.
Displays HI and the time remaining, alternately. It is
disabled by pressing the Button or turning THE MOTOR
OFF
E
24H function: Carriage Closed: The function is enabled and the carriage remains closed. Carriage
Open: When the function is enabled the Motor and the Fans turn off and the carriage returns; After this
the 24H function starts. Starts the Motor at a speed that allows suction of 100 m3/h for 10 minutes per
hour for 24h, after which the Motor will stop. When the filter alarm is active, press the button for ap-
proximately 4 seconds with the Motor and Lights off to reset the alarm. Reset is indicated by the fact
that the Display turns off. These signals are only visible when the Motor is off.
Displays 24, and the dot on the Right flashes once a
second when the Motor is on, while when the Motor is off
only 24 appears. It is disabled by pressing the Button or
turning the Motor off. When the procedure terminates,
the indication shown previously turns off: FF indicates the
need to wash the metal grease filters. The alarm is
triggered after the Hood has been in operation for 100
working hours. EF indicates the need to change the
activated charcoal filters, and to wash the metal grease
filters. The alarm is triggered after the Hood has been in
operation for 200 working hours.
F
Delay function: Enables automatic shutdown of the Motor, the Fans and the Lighting with a 30’ delay.
Cannot be enabled when Intensive or 24H are on.
Displays the speed of the Motor and the time remaining,
alternately. It is disabled by pressing the Button or turning
THE MOTOR OFF
G
Turns the lighting system on and off. Press for 2 Seconds to allow an optional additional appliance
to be turned on and off.
H
Turns the reduced intensity lighting system on and off.
Warning: Do not put anything on the sliding carriage when it is open!