29
02/2008
11. Stopping or interrupting the sanding procedure:
To stop or interrupt the sanding procedure, you must hold the gentle lifting lever (2) up with
your right hand for as long as it takes for your left hand to move the main lifting lever (1) into
the rear position. Do not release the gentle lifting lever (2) until this has been completed.
Then switch the motor off and disconnect from the mains power.
Safeguard the machine to prevent it rolling away.
The sanding dust contained in the dust bag must be disposed of immediately in a
fire-proof, non-flammable container. The container must be covered with a fire-proof,
non-flammable lid. Store the container only outdoors.
1
2
3
Operating instructions
Parquet floor sander Python C 3,2kW/50Hz
with gentle lifting lever
