background image

25

EN

PROBLEM

CAUSE

SOLUTION

If problem 

persists

The machine does not 
turn on.

The power supply cable is not 
plugged in to the power socket.

Connect the plug to a power outlet meeting the 
technical specifi cations given on the data plate “D”.

Contact an 

authorized 

Service 

Center.

The main on/off switch “M” is po-
sitioned on “0”.

Position the main on/off switch “M” on “I”.

The machine does not 
dispense coffee.

No water in the tank.

Fill tank “L” with water.

The capsule is not inserted in the 
capsule compartment.

Insert a capsule in the capsule compartment “B”.

The capsule inserted does not 
dispense coffee.

After one unsuccessful brewing attempt, with the 
same capsule inserted properly in the capsule com-
partment “B”, lift the lever “A”, the capsule will be 
expelled, close the compartment to dispense a small 
amount of water, reopen the compartment “A”, in-
sert the capsule again, lower the top until it locks in 
position and touch the 

 or 

 button. If coffee 

is not dispensed, discard the capsule.

The moveable part of the top of 
the machine is not completely 
closed. 

Lift the lever “A” and make sure that a capsule has 
been inserted into the capsule compartment  “B”. 
Lower the lever “A” again with some force, as far as 
it will go. Keep touching until you feel the lever “A” 
lock and press the 

 or 

 button.

The 

 or 

 button has not 

been pressed.

Touch the 

 or 

 button again.

The water tank has not been cor-
rectly inserted.

Insert the water tank “L” completely into the ma-
chine until it clicks fi rmly into place.

Internal components with scale 
buildup

Descale the machine as described in the related 
paragraph.

The pump did not prime.

Check that the capsule compartment “B” is empty 
of capsules, lower the lever “A” into the locked posi-
tion, and touch the 

 or 

 button to dispense 

water. Try again to brew a coffee with a capsule.

Water leaks out.

Incorrect type of capsule. 

Make sure that you have used an illy “Metodo Iper-
espresso” capsule. Make sure to use capsules for 
domestic use, identifi ed by the wording “Single-
serve ground coffee capsules for domestic use” 
which appears on the package and not capsules 
for professional use, identifi ed by the wording “For 
professional use only”.

Machine in power save mode.

Start the machine by touching a coffee button and 
wait until it is ready to brew, when both coffee but-
tons are steadily lit.

Touch the 

 or 

 button again to start brewing.

Содержание Y 1.1 Touch

















Отзывы: