Francis Lite 230, Информация пользователя

Страница: 7 / 20

L230 Searchlight
4
M12 plain washer.
U-Piece assembly.
M8 plain washer.
M8 nyloc nut.
Make sure the
mechanism is in this
position before
tightening the M5 x 8
hexagon screw onto the
flat of the push rod.
U-Piece fixings.
Fix the U-Piece
assembly using the
above fixings make
sure there is a plain
washer both sides of
the U-Piece bush.
Completed.
Make sure the
searchlight pans
and tilts
correctly.
For Pedestal Models:
Mark out and drill through cabin roof
using the template provided.
Remove the cable gland in the base
and replace with the blanking plug
supplied.
Secure the pedestal to the deck using
appropriate fixings and then mount
the searchlight to the pedestal and
secure using the fixings provided. A
drilled hole is also required in the
deck to allow for the connection to an
electrical supply. The searchlight is
supplied with 3 metres of supply cable
so that the installer can choose a
suitable connection point.