Francis Lite 230, Информация пользователя

Страница: 6 / 20

L230 Searchlight
3
Preparing the Mounting
Position
Using the template provided mark out
and drill the fixing holes through the
deck or cabin roof. In the case of
cabin control models, a centre hole is
also required to allow the mechanism
to pass through.
Mounting the Searchlight
For Deck Models:
Fit the ‘O’ ring in position and bolt the
searchlight base securely down. On
an uneven surface it is necessary to
use a suitable sealant, such as
silicone, in order to ensure a weather
proofed joint.
For Cabin/Cabin Pedestal Models:
Remove the base
lock wheel.
Replace lock wheel
with M8 x 10
hexagon screw in
the bottom fixing.
Now remove the
following items as
these are only
required on deck
models barrel lock
wheel, elevation link and fixings.
When installing
the under deck
Mechanism first
separate the
following items.
U-piece
assembly, M8 nyloc nut, M8 plain
washer, M12 plain washer, rubber
bellows, bellows top bush and the
push rod top bush.
Remove the
blanking plug from
the bellows bottom
bush.
Insert the under
deck through the
centre hole making
sure it’s aligned as
photos below.
Fasten the under
deck mechanism
using the 3 off M6 x
16 pan head screws
and spring washers.
Re-Fit the following items:
Push rod top bush.
Bellows top bush.
Bellows.