NT 1675 E - 09/2017
8
kaolyx epp heaters feature than controlers :
- TS
- HMI
- T-Box
kaolyx epp BC must be feature to the Tbox.
les aérothermes kaolyx epp ont trois types de régulation
possibles :
- thermostat TS
- commande HMI
- boîtier Tbox
les aérothermes kaolyx epp BC doivent être raccordés au
boîtier Tbox.
5 - CONTROLS
5 - AUTOMATISME
A
C et BC
Two-way valve with actuator
protection degree : Ip20
Supply voltage : 230V 50/60Hz
Max. medium temperature : + 93 °C
Max. operating pressure [MPa] : 2,1
Kvs [m
3
/h] : 6,5
Connection : 3/4”
Runtime : 18 s
Mounting : on the return line of the heat medium from the
heater.
Vanne à deux voies avec actionneur
Niveau de protection : IP20
Alimentation : 230 V 50/60 Hz
Température max de fluide : + 93 °C
Pression max [MPa] : 2,1
Kvs [m
3
/h] : 6,5
Connexion : 3/4”
Temps d’ouverture : 18 s
Montage : sur le retour de fluide thermique d’aérotherme
Three-way valve with actuator
protection degree : Ip20
Supply voltage : 230V 50/60Hz
Max. medium temperature : + 93 °C
Max. operating pressure [Mpa] : 2,1
Kvs [m
3
/h] : 7
Connection : 3/4”
Runtime : 18 s
Mounting : on the supply line of the heating medium to the
heater.
Vanne à trois voies avec actionneur
Niveau de protection : IP20
Alimentation : 230 V 50/60 Hz
Température max de fluide : + 93 °C
Pression max [MPa] : 2,1
Kvs [m
3
/h] : 7
Connexion : 3/4”
Température de marche : 18 s
Montage : sur l’alimentation d’aérotherme en fluide ther-
mique
5.1 - CONTROL EQUIPMENT
5.1. - LES ELEMENTS D’AUTOMATISME