5
6 2 CONNECTION TO POWER SUPPLY
READ CAREFULLY
•
The unit heater is connected to the main power supply by a cable with a plug integrated into the unit.
•
The power supply (electrical outlet) into which the unit heater is connected must be protected by a minimum 16A circuit breaker.
•
The unit heater cannot be connected with an extension cord.
•
The maximum curve of the power cable is 30mm.
6.3 CONTROL PANEL
Remote control connection
The remote control does not need to be adjusted, it is supplied pre-set by the manufacturer. The control is powered by a 12V
electric battery (LR23A), the electric batteries are included with the delivery. It is possible to link up to 60 units to one control. The
perimeter of the RF signal is 30 meters (open spaces).
6. INSTALLATION
152
176
161
190
30
max. 30mm
ON/OFF
ON/OFF
