Framery O, Инструкции по устранению неисправностей

Страница: 47 / 96

Cause: The converter that supplies power to the control unit is broken.
To determine if the converter is broken, first open the table bottom board. Check the
following:
• The power cord of the pod is connected to a power outlet.
• All the electrical connections inside the table are secure.
• The ON/OFF switch of the power unit is in the "I" position.
If the green LED in the PWR IN connector of the control unit is not lit, the converter that
supplies power to the control unit is broken.
Solution: Contact Framery support for a replacement part.
5.2 The ceiling light does not switch on
Condition
The ceiling light does not work. The fans and the power outlet in the table work normally.
Cause: The light's electrical connections are disconnected.
Solution: Check that the light's electrical connections are secure.
1.
Disconnect the power cord.
Framery O VCR Troubleshooting instructions
info@frameryacoustics.com
47