ASSEMBLY INSTRUCTIONS –
For Telescoping Hexagon
Canopy/Cover
FORMING THE CANOPY DOME
STEP 1
: In an open area, position the
canopy so that the inside of the canopy
(
with canopy supports showing
) is facing up.
INSTALLING THE TELESCOPING SUPPORT POLES
STEP 1
: Unlock the clamps on the bottom two of the telescoping pole and extend it to
its full length. Lock the clamps to hold it in place.
extend
STEP 2
: Remove existing caps from stakes
and replace it with caps that have holes to
receive the poles.
STEP 3
: Insert widest end of the pole
into recess of staking joint stakes –
repeat with remaining poles
.
STEP 2
: Manually expands the canopy
spokes evenly in each direction as much
as possible.
STEP 3
: Using your foot, step on the center hub of the canopy to invert and lock the
supports in place. The canopy will ‘flip’ into its proper convex shape and become stable
–
refer to image below
.
Customer Service: 1800-914-9835 | [email protected]
