FRAM FMG-MDT2500X Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 40

FRAM FMG-MDT2500X Скачать руководство пользователя страница 16

15

ASSEMBLING

•

Press the fasten button, hold the

head and insert it into the inlet(when

inserting please pay attention the

head must be adjust the appropriate

direction until close to and inlet, see

fig.1). Then push the locking handle

until the vertical position and tube

(fig.2).

•

Place the snake into the head, long

end first, and turn to feed the screw

slightly until it is set into the motor

housing (fig.3).

•

Place the cutting blade onto the

snake shaft with the blade facing the

front as illustrated (fig.4). If it is not

fitted properly, meat will not be

grinded.

•

Place the desired cutting plate next

to the cutting blade, fitting

protrusions in the slot (fig.5).

•

Support or press the center of the

cutting plate with one finger then

screw the fixing ring tight with another hand (fig.6). Do not over tighten.

•

Place the hopper plate on the head and fix it into position.

•

Locate the unit on a firm place. The bottom and surrounding air vents should be properly reserved and

not completely blocked.

•

The air passage at the bottom and the side of the motor housing should be kept free and not blocked

(fig.7).

MINCER

•

Insert the worm shaft into the cutter housing, the plastic end first.

•

Place the cutter unit onto the worm shaft (the cutting edges should be at the front). Place the medium

grinding disc or coarse grinding disc (depending on the consistency you prefer) onto the worm shaft.

(Make sure the notch of the grinding disc fit onto the projections of the mincer head.) Turn the screw

ring in the direction of the arrow on the cutter housing until it is properly fastened.

•

Attach the cutter housing to the motor unit.

•

Place the tray on the upright part of the cutter housing.

•

Now the appliance is ready for mincing.

5.

USING THE APPLIANCE

«
...
14
15
16
17
18
...
»

Содержание FMG-MDT2500X









































Отзывы:

Нет отзывов