FRAM FMG-M2000X, Руководство пользователя

Страница: 12 / 29

11
FOR THE FIRST TIME
•
Check that voltage indicated on the rating label corresponds the mains voltage in your home.
•
Wash other parts except body (motor housing) in warm soapy water.
•
Wash all parts (except body) in warm soapy water.
•
Before plugging in, make sure the ON button is not pressed.
ASSEMBLING
•
Hold the grinding head and insert it into the Head inlet (fig. 1), and rotate the locker to fix grinding head
tightly (fig.2).
•
Place the feeding screw into the head, long end first, and turn to feed the screw slightly until it is set
into the motor housing (fig.3).
•
Place the cutting blade onto the
snake shaft with the blade facing
the front as illustrated (fig.4).If it
is not fitted properly, meat will
not be grinded.
•
Place the desired cutting plate
next to the cutting blade, fitting
protrusions in the slot (fig.5).
•
Support or press the centre of
the cutting plate with one finger
then screw the fixing ring tight
with another hand (fig.6). Do not
over tighten.
•
Place the hopper plate on the
head and fix it into position.
•
Locate the unit on a firm place.
•
The air passage at the bottom
and the side of the motor
housing should be kept free and
not blocked.
5. USING THE APPLIANCE