46
PROBLEM
REASON
SOLUTION
The filter cleaning warning symbol is on.
The lint filter might be
unclean.
Clean the filter.
The filter seat might be
clogged by lint.
Clean the filter seat.
There might be a layer that
causes obstruction on the
surface of the lint filter.
Wash the filter with lukewarm water.
The filter and heat exchanger cleaning
warning symbol are flashing.
The filter seat might be
clogged by lint.
Clean the filter seat.
There might be a layer that
causes obstruction on the
surface of the lint filter.
Wash the filter with lukewarm water.
The heat exchanger might
be clogged.
Clean the heat exchanger.
The program cannot be started and the
filter warning led is blinking.
The filter may not be placed. Replace the filter.
The filter warning led is
blinking even though the
filter is placed.
Call technical service.
Your tumble dryer is equipped with a built-in fault detection system, indicated by a combination of flashing
operation lights. The most common failure codes are shown below.
ERROR CODE
SOLUTION
E03/
Empty the water tank, if problem does not solve, contact the
nearest authorized service agent.
E04
Contact the nearest authorized service agent.
E05
Contact the nearest authorized service agent.
E06
Contact the nearest authorized service agent.
E07
Contact the nearest authorized service agent.
E08
There may be voltage fluctuation in mains. Wait until voltage is
appropriate for working range.
13. AUTOMATIC FAULT WARNINGS AND WHAT TO DO