FRAM FEK-2200BK, Руководство пользователя

Страница: 10 / 24

9
BEFORE INITIAL USE
If you are using the kettle for the first time, it is recommended that you clean your kettle before use
by boiling a full kettle of water twice and then discarding the water.
OPERATION
1. To fill water into the kettle, remove it from the power base and open the lid by pressing the lid
release button, fill with the desired amount of water to the kettle. Always fill the kettle between the
minimum (0.5L) and maximum (1.5L) marks. Too little water will result in the kettle switching off
before the water has boiled.
NOTE: Do not fill the water over the maximum level, as water may spill out of the spout when
boiling. Ensure that the lid is firmly in place before connecting the power cord to the outlet.
2. Position the kettle on the power base.
3. Connect the plug into a power outlet. Press down the switch button below the handle. The
indicating lights inside the kettle will light up. Then start to boil the water. The kettle will switch off
automatically once the water has boiled and the light extinguishes. You can shut off the power by
lifting the switch at any moment during boiling water.
4. DESCRIPTION
5. USING THE APPLIANCE