![background image](http://html1.mh-extra.com/html/fram/fdh-690rbg/fdh-690rbg_manual_2326402009.webp)
8
INSTALLING GREASE MESH FILTERS
To install filters for the following four steps:
•
Angle the filter into the slots at the back of the hood.
•
Push the button on the handle of the filter.
•
Release the handle once the filter fits into a resting position.
•
Repeat to install all filters.
CARBON FILTER
(not included in the package)
Activated carbon filter can be used to trap odors. Normally the activated carbon filter should be changed
every 3 to 6 months according to your cooking habits. The installation procedure of activated carbon filter
is as below:
1.
Before installing or replacing the carbon filters, disconnect the mains power to the unit.
2.
Press the filter lock and remove the mesh filter.
3.
Turn the carbon filter on both side of the motor anti-clockwise. Replace the carbon filters with the
new carbon filters.
4.
Place the mesh filter.
5.
Connect the power supply to the wall socket.
Note:
•
Make sure the filter is securely locked. Otherwise, it would loosen and cause danger.
•
When activated carbon filter attached, the suction power will be lowered.
BULB REPLACEMENT
•
The bulb must be replaced by the authorized service or similarly qualified persons.
•
Always switch off the electricity supply before carrying out any operations on the appliance. When
handling bulb, make sure it has completely cooled down before any direct contact with hands.
•
When handling bulbs hold with a cloth or gloves to ensure perspiration does not come in contact with
the bulb as this can reduce the life of the bulb
Note:
•
Before changing the lights, make sure that the appliance is turned off and unplugged.
•
Protect against danger when changing lights, such as wearing gloves.
Changing the lights:
1.
Remove the grease filter.
2.
Use straight screwdriver to prize up the terminal box of the light connecting wire, and then pull out the
terminal plastic base of the light connecting wire. See pic 1. (Note: If some models cannot find the
terminal box, it may need to dismantle the front panel or glass first. )
3.
Use a tool or hand to prize up the LED light bottom edge, then slightly pull out the LED light and light
connecting wire. See pic 2.
4.
Apply the reverse procedure to install the light back.
Содержание FDH-690RBG
