39
Emptying the Water Tank
1.
Pull the drawer cover and carefully take out the tank.
2.
Empty the water in the tank.
3.
If there is lint accumulated on the discharge cap in the tank, clean it with water.
4.
Refit the water tank.
IMPORTANT:
Never remove the water tank when the program is running. The water condensed in the water
tank is not suitable for human consumption.
IMPORTANT
: Do not forget to empty the water tank after each use.
Cleaning the Heat Exchanger
IMPORTANT
: Clean the he
at exchanger when you see the warning “Heat Exchanger cleaning”.
IMPORTANT
: Even if the “heat exchanger cleaning warning led” is not
on clean the heat exchanger after
every 30 drying processes or once a month.
If the drying process is completed, open the loading door and wait for it to cool down.
1.
Open the plinth and release the 2 cover locks of the condenser.
2.
Hold the condenser by the plastic part and pull it out.
3.
Clean it with a showerhead and wait for the water to drain off.
4.
Fully insert the condenser into its seat and lock the 2 locks. 5. Close the plinth cover
WARNING
: Do not clean with bare hands since the exchanger fins are sharp. they may hurt your hands.