INST._PL_IT_EN_DE_FSC12H_WER.1
25
9. OPERATION MODES
1. COOLING MODE
• The “Cool” LED at the control panel is on.
• The temperature range is adjustable from 16°C to 31°C.
• In this mode, press the ON/OFF button to turn the unit off. The unit shuts down, saving the most recent temperature setting. Press the ON/OFF button
again to turn the unit on; the temperature setting saved at the shutdown is used.
• In this mode, you can adjust the fan speed as well as set the TIMER and SLEEP features.
• To ensure minimum noise, operate the unit at low fan speed.
2. HEATING MODE
• The “Heat” LED at the control panel is on.
• The temperature range is adjustable from 16°C to 31°C.
• In this mode, press the ON/OFF button to turn the unit off. The unit shuts down, saving the most recent temperature setting. Press the ON/OFF button
again to turn the unit on; the temperature setting saved at the shutdown is used.
• In this mode, you can adjust the fan speed as well as set the TIMER and SLEEP features.
• To ensure minimum noise, operate the unit at low fan speed.
3. DRYING MODE
• Press the MODE button to choose the drying mode.
• In this mode, temperature is controlled by the circuit board and cannot be adjusted.
• In this mode, press the ON/OFF button to turn the unit off. The unit shuts down, saving the most recent temperature setting. This temperature setting
is kept when the unit is turned on.
•The fan speed is set at low and cannot be adjusted.
CAUTION
While operating as a drying unit, the product does not provide cooling performance. Do not connect the pipe when the unit is operated in drying mode.
The drying mode is recommended for the autumn and winter seasons. In case it is used in summer, it is best to leave the flexible pipe connected so
that hot air is discharged outside, instead of being released indoors. While drying, ensure continuous water supply.
4. VENTILATION MODE (FAN ONLY)
• Press MODE multiple times until the FAN icon appears.
• In this mode, you can adjust the fan speed.
• Temperature cannot be adjusted.
10. REGULAR WATER DISCHARGE
The unit automatically evaporates condensate in the cooling and heating modes. When the unit is operated in the cooling or heating mode, there is
no need to discharge condensate regularly; although, in certain weather conditions, with high humidity, water may condense inside the unit. When the
inner tank is full, the air conditioner emits 8 sound signals, and the display shows “FL” indicating the tank is full and the unit has stopped.
Cooling and heating
When the unit is operated in the cooling or heating mode, make sure that a rubber end cap in the
discharge valve at the back panel is correctly placed.
To drain the tank, turn off the unit and disconnect its power cable.
Remove the plug from the water discharge valve and position its end over any drain. Make sure
the hose is not twisted or bent.
The hose has to be directed downwards. Use the plug to seal the discharge valve, put the hose
back in the hose tie and restart the unit.
FRAL SUPER COOL FSC12H
PORTABLE AIR CONDITIONER
