9. REMOTE CONTROL
SYMBOL
FUNCTION
COOLING
DEHUMIDIFYING
NIGHT MODE
TIMER ON/OFF
TEMPERATURE
OSCILLATION
HIGH
FAN
MEDIUM
FAN
LOW
FAN
When the remote control signal is transmitted to the device, an appropriate symbol is illuminated on the display of the device.
1) TRANSMISSION WINDOW
2) LCD
3) SELECTION OF FUNCTIONS
– select one of three functions: cooling, dehumidifying. The quick button function shows the abo-
ve modes of operation one after another, when the button is pressed. The transmission symbol will not appear until the button is
released, and the selected mode is confirmed.
4) SETTING THE TEMPERATURE
– the temperature setting increases or decreases the temperature by 1°C each time the button is
pressed. If the button is pressed without releasing, the temperature will increase or decrease continuously.
5) ON/OFF SWITCH
– when this button is pressed, the previous settings (temperature, fan speed, air flow direction, sleep mode)
that were set in the remote control will be sent to the device, and then the device will operate in accordance with the stored set-
tings. Press the button again to turn off the device.
6) NIGHT MODE
When this button is pressed, the air flow in the device enters the sleep mode (low speed)
• Press the “SLEEP” button to turn on the night mode. Press again and cancel the settings.
• The temperature will increase by 0.5°C (automatically after half an hour after the night mode is set, and will increase by 2°C and
remain at the level of 2°C two hours after the night mode is set.
• When there is no power, the night mode setting is automatically cancelled.
• After the device is turned off, the night mode function is automatically cancelled.
FRAL SUPER COOL FSC09C
PORTABLE AIR CONDITIONER
18
INST. _PL_EN_DE_FSC09C_WER.3
