Fragram MCOM1256 Скачать руководство пользователя страница 7

Страница: 7 / 12

ATTACHING THE GRASS DEFLECTOR

WARNING:

The line cutting blade on the grass deflector is sharp. Avoid contact with the blade. Failure to avoid contact can

result in serious personal injury.

TO ATTACH THE STRAIGHT SHAFT GRASS DEFLECTOR

See Figure 6.

Remove the slotted hex head screw from the grass deflector.

Insert the tab on the mounting bracket in the slot on the grass deflector.

Align the screw hole in the mounting bracket with the screw hole in the grass deflector.

Insert the slotted hex head screw through the mounting bracket and into the grass deflector.

INSTALLING THE STRAIGHT SHAFT GRASS DEFLECTOR AND STRING HEAD

See Figures 6

Install the grass deflector. Refer to “To Attach the Straight Shaft Grass Deflector” earlier in this manual.

Place the flanged washer on the gear head shaft.

NOTE

: The hollow side of the flanged washer should face the gear head.

Align the slot in the flanged washer with the slot in the gear head.

Place the gear head locking tool through the slot in the flanged washer and gear head.

Install the string head assembly onto the gear head shaft by turning counterclockwise.

Tighten the string head assembly securely.

Содержание MCOM1256












