Fragram MCOM1256 Скачать руководство пользователя страница 12

Страница: 12 / 12

WARRANTY

L&G Tool and Machinery Distributors warrant to the

original purchaser only, that

this power tool is free from

defects in material and workmanship. Subject to certain exceptions, L&G Tools & Machinery Distributors will repair

or replace any part on this power tool which, after examination, is determined by us to be defective in material or

workmanship for a period of twenty four (24) months after the date of purchase unless otherwise noted. Return of

the power tool to the Retailer is required, together with a copy of the proof of purchase should be included with the

returned product. This warranty does not apply to damage that L&G Tool and Machinery Distributors determines to

be from repairs made or attempted by anyone other than L&G Tool and Machinery Distributors authorized agents,

misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents. This warranty does not include

items considered as consumables.

Statutory Rights

This warranty is in addition to and in no way affects your statutory rights.

Distributed by L&G Tool & Machinery Distributors Limited

6 Kyalami Rd, Westmead 3610, P.O. Box 15313, Westmead 3608,

Telephone: 031-7176800, Fax: 031-7176868

Содержание MCOM1256












