6
ASSEMBLY
6
•
Unfold Control Arm; Hold the upper end of the
control arm in hand and rotate counter clock wise
until it clicks into place. Rotate clockwise to
reverse the process.
•
Install the flexible pipe and the large clamp on to
the elbow of the blower and tighten the large
clamp.
•
Install the straight pipe w/swivel & small clamp
and tighten the small clamp.
•
Slide handle onto swivel pipe. (Handle can be
adjusted to desired position.)
•
Install the straight section of the pipe to swivel
pipe.
•
Install the curved pipe. (Curved pipe installation is
optional and not necessary for normal use of back
blower. Design of curved pipe will cause resist-
ance in handling air tube due to air pressure.)
•
Shoulder Harness is adjustable to fit any operator.
•
Ensure that all nuts, screws and bolts are installed
and properly tightened.
In addition to head, eye, face and ear protectors, shoes to protect your feet improve your footing
on slippery surfaces. Do not wear ties, jewelry, or loose dangling clothing which could be caught
in the machine.
Do not wear open-toed footwear, or go barefoot or bare legged. In certain situations you must
wear total face and head protection.
WARNING DANGER
