FRADAN BB-70 Скачать руководство пользователя страница 6

5

5

• Use only FRADAN original equipment parts when servicing the unit, this will ensure safe and proper performance

of your product. These parts are available from your dealer. The use of any other accessories or attachments may
cause a potential hazard or injury to the user, damage to the machine and void this warranty.

• Clean the machine completely, especially, the fuel tank, its surroundings, and the air cleaner.

• When refueling, be sure to stop the engine and confirm that it is cooled down. 

Never refuel when the engine

is running or hot.

When gasoline spills, be sure to wipe it up completely and properly dispose of those materi-

als before starting the engine.

• Stay clear of other workers or bystanders by at least 15 meters / 50 feet.

• When ever approaching an operator of the machine, carefully call his attention and confirm that the operator

stops the engine. Be careful not to startle or distract the operator which can cause an unsafe situation.

• The engine should be turned off when the machine is moved between work areas.

• Pay attention to loosening and overheating of parts. If there is any abnormality of the machine, stop operation

immediately and check the machine carefully. If necessary, have the machine serviced by a authorized
FRADAN dealer. Never continue to operate a machine which may be malfunctioning.

• In start-up or during operation of the engine, never touch hot parts such as the muffler, the high voltage wire or

the spark plug.

• After the engine has stopped, the muffler is still hot. Never place the machine in any places where there are

flammable materials (dry grass, etc.), combustible gasses or combustible liquids.

• Pay special attention to operation in the rain or just after the rain as the ground may be slippery.

• If you slip or fall to the ground or into a hole, Press the Stop Button until Engine Stops.

• Be careful not to drop the machine or hit it against obstacles.

• Before proceeding to adjust or repair the machine, be sure to stop the engine and detach the spark plug cap

from the spark plug.

• When the machine is placed in storage for a long time, drain fuel from the fuel tank and carburetor, clean the

parts, move the machine to a safe place and confirm that the engine is cooled down.

• Make periodic inspections to assure safe and efficient operation. For a thorough inspection ot your machine,

please contact a FRADAN dealer.

• Keep the machine away from fire or sparks,

SAFETY RULES & PRECAUTIONS

Содержание BB-70















Отзывы: