Cybercino Users Manual – Draft Edition – 7th
th
January 2009
7
SECTION 02 - General Use
-
Beans
Ensure that the hopper contains whole roasted beans. If the level appears to be low, top up the
hopper with fresh, whole beans. Do not put ground coffee into the hopper, only whole beans.
-
Water
The machine should be plumbed in when it is installed. If water is not passing through the
machine, check to see if the plumbing connections are in place and the valves are open. Are
there any blockages?
-
Milk
For automatic steamed and foamed milk production in drinks, the milk inlet needs to submerged
into the milk container in the neighbouring refrigerator unit. Ensure that the milk is fresh, cold,
and that there is enough in the container.
-
Drink Selection
A variety of drinks can be made using the Cybercino (these are listed below). These are achieved
by simply pressing a series of buttons. The drinks produced will therefore be consistent.
#
Drink
Button Sequence
Further Actions
1
1 x Regular Cappuccino
[06]
Place one regular cappuccino cup on drip tray.
2
2 x Regular Cappuccino
[06] [06]
Place two regular cappuccino cups on drip tray.
3
1 x Large Cappuccino
[08] [06]
Place one large cappuccino cup on drip tray.
4
1 x Decaf Regular Cappuccino
[02] [06]
Open decaf flap after pressing buttons, insert one pre-ground
decaf shot of coffee, close flap, place one regular cappuccino cup
on drip tray.
5
1 x Single Espresso
[03]
Place one single espresso cup on drip tray.
6
2 x Single Espresso
[03] [03]
Place two single espresso cups on drip tray.
7
1 x Double Espresso
[03] [03]
Place one double espresso cup on drip tray.
8
1 x Decaf Single Espresso
[02] [03]
Open decaf flap after pressing buttons, insert one pre-ground
decaf shot of coffee, close flap, place one single espresso cup on
drip tray.
9
1 x Regular Latte
[05]
Place one regular latte cup on drip tray.
10
2 x Regular Latte
[05] [05]
Place two regular latte cups on drip tray.
11
1 x Large Latte
[10] [05]
Place one large latte cup on drip tray.
