Cybercino Users Manual – Draft Edition – 7th
th
January 2009
10
[11]
to increase grind time
[10]
to reduce grind time
[02]
to test
[07]
exit grinder configuration mode
2.
To configure an espresso
a.
In general configuration mode, press button 03. This will enter the espresso
configuration mode.
b.
Press button 03 again to step through the espresso configuration. The first stage is
the grind (preset by the grinder configuration mode).
c.
If this is acceptable, press button 03 again.
d.
The next stage is the water volume. To start the brew press button 03 and allow the
counter to cycle up.
e.
When the correct volume has been reached, press button 03 again.
f.
The setting will be stored. To confirm that this is acceptable, press button 02 to
produce a test espresso.
g.
Press button 07 to exit espresso configuration mode.
SEQUENCE:
[03]
to enter espresso configuration
[03]
step 1, grind time
[03]
step 2, water time start
[03]
step 2, water time stop
[02]
test espresso
[07]
exit espresso configuration
3.
To configure a black coffee
a.
In general configuration mode, press button 04. This will enter the black coffee
configuration mode.
b.
Press button 04 again to step through the black coffee configuration. The first stage
is the grind (preset by the grinder configuration mode).
c.
If this is acceptable, press button 04 again.
