Fracarro SIG9506, Руководство по эксплуатации

Страница: 19 / 76

19
ENGLISH
3.0 CHANNEL SETUP MENU - PROGRAMMING THE RECEIVERS
From the first menu press the key when the cursor is on CHANNEL SETUP to get access to the
receiver configuration.
Select the receiver to program and then gain access to the input, output and aux menu.
See chapter 3.1, 3. and 3.3 for details on the parameters to be set.
3.1 SETTING INPUT PARAMETERS
This section is for inputting the parameters for the selected channels:
remote power for LNB
IF frequency of the program to receive
automatic frequency control (AFC)
video parameters
audio parameters •
•
•
•
•
INPUT DATA SETTING
(SEE CHAPTER 3.1)
OUTPUT DATA SETTING
(SEE CHAPTER 3.2)
INPUT SIGNAL
MEASUREMENTS
(SEE CHAPTER 3.3)
COPIES THE PARAMETRES
OF ONE CHANNEL TO
ANOTHER (see page 27)
CHANNEL 1
CHANNEL 6
MODULE SEARCH
SCAN MODULES
COPY FROM ...
CHANNELS
FOUND
PASTE ON ...
WAIT...
COPY MODULES
INPUT
OUTPUT
MEASURES
RESET
CHANNEL
SETTING
CHANNEL SETTING
FUNCTION “MODULE SEARCH”
TO BE USED WHEN CHECKING
IF THE MODULES
ARE WORKING PROPERLY
(see page 27)
HARDWARE RESET
OF ONE OR ALL THE
CHANNELS (see page 27)
MODULE1 MODULE 6 ALL CHANNELS