FPV3DCAM BlackBird 1, Руководство пользователя

Страница: 8 / 10

3D FPV camera The BlackBird 1
User manual
2016 fpv3dcam.com
7
Do not connect the video output jack to the audio input. Usually this RCA red or
white jacks. It does not cause damage, but the image on the monitor / stereo video
goggles will not show.
As power for the camera it is permissible to use an external DC power source with a
voltage of 5 to 12V. The sources to be used can be:
 From 4 to 9 batteries with a voltage ( 1.5V ) connected in series;
 From 5 to 9 batteries NiMH, NiCd ( 1.2V ) connected in series;
 From 2 to 3 batteries Li-Ion, Li-Po ( 3.6V ) connected in series;
 1 lead battery with a voltage of 6 to 12V;
 A stabilized DC power supply with a voltage of 5V to 12V and a current of 150
mA.
Plus power supply connects to the red wire of the interface cable, minus connected
to the black wire of the interface cable.
Attention! Observe that the polarity to the power supply connections are correct.
Connection of the power supply to the video output, or failure to comply with the
polarity will damage the camera!
Before starting
Before using the BlackBird 2 it is recommended:

check the lens focus settings ............................................................................. (item 3.1)
 ensure there is no vertical image shift .............................................................. (item 3.2)
 configure convergence ...................................................................................... (item 3.3)
Picture 3. General scheme of connection
5V- 12V
GND GND
video