FPV3DCAM BlackBird 1, Руководство пользователя

Страница: 6 / 10

3D FPV camera The BlackBird 1
User manual
2016 fpv3dcam.com
5
The product consists of the printed-circuit board with the electronic components
and lenses which are installed on it.
The board of the camera consists of two parts, the main (1) and additional (2). On
the main part there are the interface (10) and board-to-board connectors (7). On the
additional part there are only board-to-board connectors (7).
On the board video sensors are installed. They are closed with the lens holders (4). In
the holders there are lenses (1) which are installed and fixed with screws (5). Lens
holders are fixed on the board with screws (9).
Indication of giving of supply is made by the led (8) located on the face of the main
board (1).
Interface connector (10) provides voltage to power the camera and get video
images. Numbering of contacts of the socket is made from left to right ( see picture 1b ).
First contact plus 12V , second pin GND (it is common for power and video), the third
contact - video output .
Connecting to a power source and the receiver signal is performed using the
interface cable.
1.5 Device and operation
The basis of video camera is made by two sensors and their optical system. Signal
from a sensor switched alternately, thus, signal is generated in the format interlaced 3D.
Then the signal is amplified and transmitted to the interface connector.
1.6 Adjustment instrument, tools and accessories
The main tool that is required for camera maintenance - phillips screwdriver. It is
used when setting the vertical displacement and focusing the lenses. You can use it to
loosen the screws that hold the lenses and their holders.
Optional accessories:
 Pencil for cleaning lenses. It is used to clean the lenses from contamination ( see
picture 2b ). The flat side of the stick used for cleaning the lens from dirt. A brush is
used to clean the dust from the lenses.
 Connecting cable 300 mm need to connect board camera together. You can
order cable of any length, but not more than 2m.
As a means of measurement resolution it is used a special table. For example,
EIA1956 or another for resolution of at least 600 TVL ( see picture 2a ).
Picture 2. Accessories
a b