FPM Agromehanika 627 152, Сборка / Эксплуатация / Техническое обслуживание, Список запасных частей

Страница: 8 / 24

S A F E T Y
ATTACHING THE RAKE TO THE TRACTOR
Before coupling and decoupling the rake to or from the tractor, lock the hydraulic controls in
order to prevent unintended raising or lowering.
When coupling your rake, observe the category of the tractor and rake linkages; they must match.
- The area around the attachment points is especially hazardous. There is a risk of injury when
coupling linkages.
- Never stand between the tractor and the rake when using external hydraulic controls.
- Watch out for and prevent any lateral movement of the linkages when the rake is in the
transport position.
- When driving on public roads with the rake in the transport position, the tractor’s
hydraulic controls must be locked in order to prevent unintentional lowering.
- Never use the rotary rake on sloping terrain, or transport the rake using a tractor with a
narrow wheel track.
NEVER IGNORE THESE WARNINGS.
S A F E T Y
USING THE PTO SHAFT
- Only PTO shafts supplied with the rake and approved by the manufacturer may be used.
- All PTO shaft guards must be attached and in an appropriate condition.
- Ensure proper tube overlap in the transport and operating position.
- Attaching and removing the PTO shaft may only be performed when the tractor output shaft and the
engine are turned off, and the ignition keys are removed.
- Always make sure you properly install the PTO shaft by placing the star freewheel clutch
towards the rake when attaching the shaft and checking for a tight fit.
- Secure the PTO shaft guards with the chains to prevent rotating; always observe the
instructions for the PTO shaft.
- When not using the rake, attach the PTO shaft to the frame at the provided place.