4
U35 FPI Direct Vent Gas Insert
SAFETY LABEL
This is a copy of the labels that accompany
each U35 Gas Insert. We have printed a copy
of the contents here for your review. The
safety label is located on a plate inside the base
of the unit visible when the bottom louver is
opened.
NOTE: FPI units are constantly being im-
proved. Check the label on the unit and if
there is a difference, the label on the unit
is the correct one.
For the State of Massachusetts, installation
and repair must be done by a plumber or
gasfitter licensed in the Commonwealth of
Massachusetts.
For the State of Massachusetts, flexible
connectors shall not exceed 36 inches in
length.
For the State of Massachusetts, the appli-
ances individual manual shut-off must be a
t-handle type valve.