FPG Visair IN-VA10-A004, Руководство по эксплуатации продукта

Страница: 18 / 40

Part No. 25553 Rev. J November 2017
- 18 - Visair Refrigerated Cabinets
Setting Up
cont.
VISAIR CABINETS - INSTALLATION
Isolation If the cabinet is not connected to an outlet socket, but is hard wired to the mains
supply, a means of isolation must be provided.
If a plug and socket are used, they should still be accessible after the cabinet is
installed.
Location
VISAIR CABINETS - INSTALLATION
Ventilation
The front louvers and vents located on the top of the cabinet must never be
obstructed. If obstructed the cabinet may overheat and cause an electrical
malfunction.
If the cabinet is installed in an alcove, or under any structure, a minimum
clearance space of 200mm must exist above the cabinet top.
Before use, operate the cabinet for 1-2 hours to remove any fumes or odours,
which may be present.
Draughts The door-
less cabinet features an “air curtain” to retain the cold air within the
cabinet. A “curtain” of cold air falls from a linear vent, across the top of the open
cabinet front, to be re-circulated through the evaporator cooling coils.
The cabinet should not be sited where strong draughts will deflect the “air
curtain”. If this happens, excess condensation will form on the products, and
cooling will be less effective.