FPG IN 4H08S, Руководство по эксплуатации продукта

Страница: 16 / 28

Part No. 26124 Rev. G September 2018
- 16 - Inline 4000 Series Cabinets
SERVICING
Control Gear
HEATED CABINETS - SERVICING
Location The electrical
control gear is
located in the top
of the cabinet.
Remove the top
plate to access
the switches, LED power supplies, electronic temperature controller and fuse.
Lighting
HEATED CABINETS - SERVICING
Caution Do not service lights without isolating the cabinet from the mains supply.
Test Lighting
Components
Before replacing an LED strip, check that the power supply is working.
If there is no dc voltage at the output, the power supply should be replaced.
If there is a dc output, the LED strip must be replaced.
Access to LED
Strips The LED strips are protected with
plastic covers. These clip into grooves
in the aluminium extrusion.
Remove the plastic cover to access the
LED strip.
The top light assembly is similar to the
shelf lights, but the correct replacement
unit must be used.
LED Strip
Replacement Individual LED modules cannot be
replaced. A complete light unit must be
used.
Connection is made with a plug and
socket. Disconnect the supply lead from
the faulty unit, and reconnect it to the
replacement unit.
Replace the plastic cover.