FPG IN 3C08, Руководство по эксплуатации продукта

Страница: 14 / 48

Part No.26119 Rev. G August 2018
- 14 - Inline 3000 Series Cabinets
TROUBLE SHOOTING
FAULT POSSIBLE CAUSE REMEDY
Cabinet does not operate/start
The mains isolating switch on
the wall, circuit breaker or
fuses are off at the power
board
Turn isolating switch circuit
breaker or fuses on
Internal fuse has blown
Have wiring checked and
replace fuse (5A Slow Blow)
The main switch on the
cabinet is OFF
Turn the main switch ON
Cabinet does not reach
temperature
One or more doors is open
Close doors and re-test
temperature after 30 minutes
Too much product in cabinet Remove some product
Ventilation grills are blocked Vacuum or remove blockage
Product blocking air grill Place product on shelves
Evaporator coil fins blocked Clean coil fins of food etc.
Trays obstructing air flow Re-position trays on shelves
Thermostat needs adjustment Adjust controller
Ambient temperature > 25

C
Adjust store air conditioning
Damaged or missing door seal Replace door seal
Evaporator coil iced up De-ice coil
Condenser radiator blocked Remove dust and debris
Thermostat faulty Replace controller
Temperature probe damaged Replace temperature probe
Defrost cycle not suitable
Adjust to match
environment
Fans not operating Have fans checked/replaced
Cabinet lights not working
The light switch is OFF Turn light switch ON
A failed LED power supply Replace the power supply
An LED strip has failed Replace the LED assembly
Fuse has blown
Have wiring checked and
replace fuse (5A Slow Blow)
Doors are not sliding smoothly
Door not in track Install door correctly in track
Debris in track Clean door tracks
(see cleaning)
Lack of lubricant
Apply food grade lubricant to
door track
Aluminium parts corroded Caustic detergent damage Order replacement parts
Service
Personnel Only The table entries in italics indicate actions to be taken only by qualified Service
Personnel.