51.0077.0004.01 Rev.03
FP wMBusConf - Operating Manual
6 Installation and start-up
Operating Manual
2
Installation and start-up
2.1
Assembly and cabling
The back of the wMBus adapter’s housing is screwed onto the wall with the terminals pointing
downwards. There are two wall brackets on the outside of the housing for this purpose.
The following drawings show the dimensions and the required dimensions for wall installation:
Figure 3: wMBus adapter dimensions
In order to wire the wMBus adapter, use a suitable flat-head screwdriver to open the cover’s housing
screws. There are three connections on the printed circuit board inside:
Figure 4: wMBus adapter connections
-
(1): Two screw terminals to connect a wired M-bus master
-
(2): Two screw terminals for transmission to further M-bus participants (optional)
-
(3): USB mini port for setting parameters
