FP wMBus, Руководство по эксплуатации

Страница: 10 / 15

51.0077.0004.01 Rev.03 FP wMBusConf - Operating Manual
10 M-bus telegrams for registered meters Operating Manual
RSP_UD: Example
Laye
r
Byte no. Name Contents Bytes [hex]
DR2 DIF (integer 8Bit) 01h
DR2 VIF (linear extension) FDh
DR2 VIFE (RSSI / reception level dBm) 71h
DR2 Value (-96dBm) A0h
DR3 DIF (integer 16Bit) 02h
DR3 VIF (age / currentness duration) 74h
DR3 LSB value (900s) 84h
DR3 MSB value 03h
Checksum ??h
DL
L
Stop Stop byte 16h
c) Decrypted telegram
If a registered meter sends an unencrypted telegram or the correct AES128 key is stored, the
data records contained in the telegram are simply copied into the telegram. However, all
clearly identifiable idle fillers (2Fh) are removed. The data records with RSSI (DR2) and age
(DR3) are optional and are only transmitted if these options are activated in the wMBus
adapter (possible as of firmware V1.5.0).
RSP_UD: Example
Laye
r
Byte no. Name Contents Bytes [hex]
1 Start Start byte 68h
Da
ta
Lin
k
La
ye
r (D
LL)
2 L-field Telegram length (from the C-field checksum) 1Dh
3 L-field Telegram length (from the C-field checksum) 1Dh
4 Start Start byte 68h
5 C-field SND_UD 08h
6 A-field Primary address (meter) 00h
7 CI-field 72h (long header) 72h
Tr
an
sp
ort
L
ay
er (
TP
L)
8 ID-field LSB identification number 00h
9 ID-field Identification number 11h
10 ID-field Identification number (meter ID) 22h
11 ID-field MSB identification number 33h
12 Manuf. LSB manufacturer code (code = REL) ACh
13 Manuf. MSB manufacturer code 48h
14 Version Version B8h
15 Type Device type 07h
16 Acc Access number 01h
17 Status M-bus status (e.g. error, alarm) 00h
18 Config. Configuration field (e.g. encryption) 00h
19 Config. Configuration field (e.g. encryption) 00h
20 DR1 DIF (BCD 8 characters) 0Ch
Appl
ic
at
io
n
La
ye
r (
APL
)
21 DR1 VIF (Volume [l]) 13h
22 DR1 LSB value 15h
23 DR1 Value 08h
24 DR1 Value (00000815 [l]) 00h
25 DR1 MSB value 00h
26 DR2 DIF (integer 8Bit) 01h