FP ultimail, Руководство оператора

Страница: 55 / 214

Special functions 55
7.3 Using the ultimail as incoming mail stamp
For registering your incoming mail (up to a thickness of 6.35 mm), you can use the
ultimail as incoming mail stamping machine. For this function, use the INCOMING
STAMP mode. The ultimail will print ‘Received on: …’ together with the date
displayed. All users can use this function, even without access card.
Setting incoming mail stamp function
• Go to the SET UP menu using the
key.
• Select MODE SETTING
INCOMING STAMP.
The ultimail sets the incoming mail stamp
and goes back to home menu.
In the home menu, the status line shows
INCOMING STAMP.
Change date
If necessary, you can change the date in
the same way as for the franking imprint
(see page 34).
Print “Received on: …”
• Feed incoming mail in single pieces
and manually. Place the side to be
printed face upwards!
The ultimail prints the incoming mail
stamp and ejects the mail to the right-
hand side.
End “Incoming stamp” mode
• In home menu, press the key for
about 3 seconds.
The ultimail goes back to METERING
(franking) mode.
SET UP
MODE SETTING
INCOMING STAMP