FP PostBase Скачать руководство пользователя страница 171

Страница: 171 / 204

Appendix – Moving the PostBase One to another location

171

On the feeder

• Insert the FSCP plug (termination plug)

into the 15-pin interface (P2) and tighten
screws.

• Plug the power cable into the power socket

of the feeder.

Commissioning and functions check

• Recommendation: Cleaning the contacts

in the cartridge bracket with the FP clean-
ing kit ‘clean & renew’ for ink-jet print sys-
tems, available at Francotyp-Postalia.

• Fill the sealant tank with sealing liquid.

Please refer to chapter 15.9, page 123.

• Connect the power cables of the franking

machine, the dynamic scale, the power
supply unit of the sealer, and the feeder to
grounded single-phase power sockets.
Make sure your office power supply con-
forms to the power requirements indicated
on the serial number plates.

• Connect the network cable (Ethernet).

• Switch on the PostBase One franking sys-

tem. Please refer to chapter 3.1, page 13.

PostBase One with ink cartridges:

• Insert the ink cartridges. To do this, call up

the exchange procedure from the menu
(see page 101).

Содержание PostBase













































































































































































































Результаты поиска

Содержание PostBase

Отзывы:

Похожие инструкции для PostBase

Бренды по названию

Популярные бренды

FP PostBase, Руководство оператора

Результаты поиска

Содержание PostBase

Отзывы:

Похожие инструкции для PostBase

Бренды по названию

Популярные бренды