FP optimail 30, Руководство по установке

Страница: 14 / 32

optimail 30 Installation Guide 14
Step 8: Connecting the optimail 30
Warning! Use only the power and modem
cables provided with the optimail 30 or
approved by Francotyp-Postalia.
Make sure that cables are not damaged.
Connect the optimail 30 only to a grounded
single-phase power socket. Make sure your
office power supply conforms to power
requirements shown on the serial number
plate of the optimail 30.
Make sure the socket for connecting the
optimail 30 is close by and easily accessible
at all times.
If you are using the internal modem:
• Plug the modem cable into the modem
socket on the postage meter. The modem
socket is at the rear of the postage meter.
The spring on the plug must face down-
wards.
• Connect the modem cable to the telephone
socket (analog). This is where you would
connect a fax machine.
If you are using the Universal Link Box:
(optional)
• Set up the Universal Link Box (ULB)
according to the enclosed description.
• Use the adapter (D-Sub, 9-pin male / 25-
pin male) to plug the connection cable to
the serial interface of optimail 30.
• Plug the AC adapter of the ULB into a
grounded single-phase power socket.
Make sure your office power supply con-
forms to power requirements shown on the
AC adapter’s serial number plate.
Modem cable
Connection cable
Network cable
Power connection
(AC adapter)
Adapter