mymail Operator Manual
72
10.18
Updating the mymail software
You can use the Francotyp-Postalia mailcredit PC application to update the operating
software of your mymail. To do so, the mymail must be connected to a PC with
mailcredit software
.
Caution
! In order to synchronize data between the mymail an the data
center, a connection to the TDC is necessary before updating the software.
Otherwise, certain data may be lost. Therefore, initiate TELESET prior to
updating the software of your postage meter.
The Configuration Report indicates the software version installed on your
mymail (see chapter 10.15, page 69).
Connect the mymail to the PC. Please
read the mymail Installation Guide.
Set up mymail for operation with
mailcredit. See chapter 10.11 on
page 64.
Run TELESET as usual (see chapter 9).
If you do not need additional credit, simply
initiate the process with an amount of
‘$ 0’.
During the connection to the TELESET
data center, the data synchronization will
be executed.
When the TELESET process is complete,
select “Log off” in the main menu and
confirm.
You can start software updating when the
mymail is in standby and mailcredit
indicates that communication with the
mymail is possible.
To do so, run the mailcredit function
“Update meter” on the PC. Also refer to
the mailcredit manual.
Содержание myMail
