mymail Operator Manual
26
4.2
Positioning and metering a letter
You can meter letters up to a thickness of 0.23". For thicker letters, meter the empty
envelope or use the
special FP Mailing Solutions postage meter labels (double
labels) of at least 5.5" length
. Observe the specifications for mailpieces on page 103.
Use envelopes made of ink-absorbent material with as smooth a surface as possible.
This gives the best printing results.
Caution!
Never lift up the operating panel during printing. Opening the flap
causes the mymail to abort printing immediately for safety reasons. Meter
imprint may be incomplete and useless.
If all the settings for the meter imprint are
correct, you can position and meter the
letter.
Using the Info key
you can display the
current settings.
The main menu must be visible in the
display for metering.
Position the letter
– side to be printed face up
– top edge first.
Place the letter at the right hand edge of
the letter slot and push in as far as it goes.
As soon as the sensor (in the back right
hand corner of the letter slot) detects the
letter, the mymail grips the letter tightly
and prints it after a short time.
“Please wait…” appears in the display
during printing. Do not remove the letter
until the main menu reappears and the
mymail releases the letter.
Содержание myMail
