FOXWELL
VS300 Videoscope User’s Guide - English Version_V1.00
2
Battery posts, terminals, and related accessories contain lead and lead compounds,
chemicals know to the state of California to cause cancer and birth defects or other
reproductive harm. Wash hands after handling.
Production Introduction
The Foxwell VS300 videoscope / borescope is designed to work with automotive
diagnostic platform. The camera-tipped probe allows you to get that camera lens
around corners, inside or behind walls. The probe and camera lens are waterproof
and featured with built-in LED, and can be used to inspect any dark, fluid soaked
and hard to reach areas. Mechanics can inspect engine cylinder walls by simply
removing a spark plug and inserting the probe. It gets a clear view inside cylinder
heads, behind wallboards and other hard to reach areas normally hidden from sight
and turns your tablet scanner into a video inspection scope. It can record both
images and videos, which offers you a cost-effective way to inspect any vehicle,
machine or infrastructure.
NOTE: The power of this videoscope is directly supplied by the USB port, and no
external power source is needed
Technical Specification
Operations
For Android system Foxwell Tablet
1. Getting Started
Step 1
Connect the videoscope to Android system Tablet with the USB cable. And take out the
lens shell in another side.
Step 2
Power up the Foxwell Tablet, and select the “Videoscope” application on the main Menu.
Product Length
1000mm
Diameter of Camera
5.5 mm
USB Interface
2.0
Resolution
1280* 720 pixels
Lens Shell
30 mm
Focal Length
3~ 8 cm
Flexible Probe
900mm
Field of View
54 degree
Handle
180mm
Frame Rate
30fps
USB Cable length
1200mm
Water Proof Level
IP67
Built-in LED light
6 pc
Net Weight
0.26kg
