Operating Instructions
www.foxunhd.com
8 Control
8.1 Local IR remote control.
①
Standby Mode.
②
OUTPUT-X select INPUT-Y:
Press OUTPUT-X
（
X means 1 to 8 of outputs
）
Press INPUT-Y (Y means 1 to 8 of inputs)
③
All outputs select INPUT-Y:
Press ALL button in zone OUTPUT
Press INPUT-Y button (Y means 1 to 8 of inputs),
then INPUT-Y switched to ALL OUTPUTS.
④
Cancel Button: Cancel the switching operation
⑤
PTP button: Mirror all inputs and outputs
(Ex. Input 1 to output 1, input 2 to output 2, etc):
Press PTP button in Zone OUTPUT
8.2
RS232 Pin Assignment
Matrix
Remote Control Console
PIN
Assignment
PIN
Assignment
1
NC
1
NC
2
Tx
2
Rx
3
Rx
3
Tx
4
NC
4
NC
5
GND
5
GND
6
NC
6
NC
7
NC
7
NC
8
NC
8
NC
9
NC
9
NC
Baud Rate:115200bps
Data Bits:8 bit parity:None Stop Bit:1 bit
Flow Control:None
8.3 RS 232 Control
8.3.1 Software control
Connect the 4x4 Matrix to PC with a RS232 cable, open the software on your PC. On the COM Setting
session, select the COM port according to your PC and click Connect to get connected.
On this COM setting session, you can also change the Device name, Device name support up to 16
