STU 720if
OPERATING INSTRUCTIONS
9
STU, VCR , TV, Hi-Fi
NOTE:
It is recommended that you switch off the mains
supply to the STU before connecting or
disconnecting the LNB connector.
1
Connect the terrestrial antenna connector to the RF IN socket on
the STU.
Follow Steps 2 to 4 if you are not using SCART connectors
2
Using a flylead, connect the RF OUT connector on the STU to the
RF IN connector on the VCR.
3
If required, use an RF flylead to connect the RF OUT on the VCR
to the RF IN on the TV
.
4
Connect the coaxial cable from the satellite dish to the LNB IN
connector on the STU. Tighten the connector finger tight.
Follow Steps 5 and 6 if you are using SCART connectors.
5
Using a SCART-to-SCART cable (not supplied), connect the
TV SCART connector on the STU to the SCART socket on the
TV.
OR
Using a SCART to RCA connector (not supplied), connect the
TV SCART to the AV connectors on your TV. If only one
audio socket is available on your TV, the mono audio
connector should be used.
6
Using another SCART cable, connect the VCR SCART on the
STU to the SCART on the VCR.
7
Connect the VARIABLE LEFT and RIGHT STEREO AUDIO OUT
connectors on the STU to the LEFT and RIGHT AUDIO INPUT
connectors on the stereo.
8
Switch power on to the STU.
Republic of South Africa
WARNING! High Voltage
DANGER! Do not open
Unauthorised opening
renders warranty invalid
Protect against moisture
REAR PANEL
SCART TO SCART
A
V
SCART TO RCA
RF IN
RF OUT
RF IN
VCR SCART
TV SCART
VCR
TV
N4078
