STU 720if
OPERATING INSTRUCTIONS
11
Bouquet Selection
TV services are transmitted in a subscribed package called a
BOUQUET, which contains a number of services. The services
transmitted by Foxtel are contained in a bouquet labelled FOXTEL.
When the bouquet is selected, the services in that bouquet will be
listed numerically in the Electronic Programme Guide (see page 13).
Pressing TV on the remote control displays a list of the available
bouquets.
Only one bouquet is available labelled FOXTEL. If the STU is not in
the Foxtel Bouquet, no services will be available. To select the
FOXTEL Bouquet, press the TV button on the remote control (The
FOXTEL Bouquet should appear), then select OK.
The STU is capable of managing multiple Bouquets. FOXTEL may
choose to add further Bouquets post installation of your STU.
Please use the TV button to select the required Bouquet.
Selecting Specific Services
Specific TV or Music & Radio services can be selected, either:
•
Directly
•
By stepping through services
•
By using the Electronic Programme Guide (EPG),
or
•
By using the Information Bar.
Selecting Services Directly
Services can only be selected directly using the RCU. To select a
specific service, do the following:
1
To select an audio service, press
on the RCU. Press TV to
restore TV services.
2
Press the number of the required service on the RCU’s
numerical keypad.
The specific service will be heard/displayed after a few
moments accompanied by an information box at the bottom of
the TV screen with details of the selected service.
NOTE:
To select services requiring two-digit
numbers, i.e.,10-99, press the first digit, then
the second digit without pausing.
TIP:
When the key for the first digit is pressed on the RCU, the
corresponding number is displayed on the left of the front
panel numerical display on the STU. After a few moments,
the number moves to the right. The second digit of two
digit number must be keyed in before this move takes
place
Stepping through Services
Stepping through services is possible using either the RCU or STU
front panel keys.
Stepping using the Remote Control
To step through services using the remote control, do the
following:
1
Select the type of service required, TV or Music & Radio ( ).
2
Press P+ to step to the next service or P - to step to the
previous service in the list of available services.
After pressing P+ or P -, an information box is displayed at the
bottom of the TV screen with details of the service. After a
few seconds, the relevant service is displayed/heard.
3
If required, continue stepping by pressing P+ or P - until you
find the service you prefer. It is not necessary to wait for
services to be displayed/heard before stepping to the next or
previous service.
If you decide to watch or listen to a service you have stepped
to, wait for the service to be displayed/heard. The information
box will disappear after a short while or can be removed
immediately by pressing EXIT.
NOTE:
When you reach the last available service in the
list and press P+ you are returned to the first
service in the list.
Stepping using the STU Front Panel Keys
To step and select a specific service using the STU front panel
keys, do the following:
1
Select the type of service required, by pressing TV/ to
switch between TV services and audio services. Selection of
the audio service is indicated by a green indicator on the front
panel display.
2
Press (up) to step to the next service or (down) to step
to the previous service in the list of available services.
After pressing or , an information box is displayed at the
bottom of the TV screen with details of the service. After a
few seconds the relevant service is displayed/heard.
3
Continue stepping, by pressing or until you find the
service you prefer. It is not necessary to wait for services to
be displayed/heard before stepping to the next or previous
service.
To view/listen to any service you have stepped to, wait for
the service to be displayed/heard. The information box will
disappear after a short while.
NOTE:
When you reach the last service in the list,
pressing
returns you to the first service in
the list
.
The
and
symbols have dual functions and
cannot be used for stepping while the volume
control box is displayed on the screen. This
box is displayed when setting the volume, see
this page.
