Foxtel DSN700, Руководство пользователя

Страница: 46 / 51

S
O
L
V
IN
G
P
R
O
B
L
E
M
S
43
Solving problems
Your remote control
isn’t working.
Something is between
the remote control
and your digital set-top
unit.
Make sure you point your remote control directly at
your digital set-top unit and that nothing is between
it and your digital set-top unit.
The red light at the end of the remote control should
flash each time you press a remote control button.
Problem Possible cause Suggested solution
The ir receive light on your digital set-top unit's front
panel should flash each time you press a remote
control button.
The batteries are flat
or inser ted the wrong
way round.
Check the batteries and replace them if necessar y.
You’ve forgotten
your PIN.
Call your FOXTEL provider for advice.
You can’t use your
FOXTEL remote
control to change
channel.
Your digital set-top
unit may be in ‘av
mode’ (see page 32).
If you want to watch digital TV, press FOXTEL on
your remote control to put your digital set-top unit
You are having
difficulties using a
FOXTEL interactive
feature, such as
Active or Box Office.
There may be a
problem with your
telephone line.
Check that the telephone lead between your digital
set-top unit and the telephone point is proper ly
plugged in. (Always switch your digital set-top unit
off at the power supply before plugging or
unplugging any other equipment).
Check that the telephone line is working by picking
up your telephone and listening for the tone.
into FOXTEL viewing mode.