Foxtech DA16 Radio Control System
User Manual
©
2018 FOXTECH All Rights Reserved
35
1. Signal Mode
Set signal mode for DA16 receiver’s 3 different output mode, SBUS, PPM and PWM.
Steps to Set Signal Mode
(1) In general settings menu, select “Sigl Mode” and tap on “SBUS / PPM / PWM” to switch different signal
mode;
(2) Receiver status indicator blinks yellow once when it is switched to SBUS mode, yellow twice to PPM
mode, yellow 3 times to PWM mode;
(3) When it is done, receiver status indicator blinks green in all modes, and its blinking speed indicates
signal strength. Faster it blinks, weaker signal strength is.
2. Auto Bind
When DA16 receiver is powered on, the automatic linking function is turned on, and receives no signal from
transmitter in 20 seconds, receiver starts linking to transmitter automatically.
Automatic linking function is to simplify procedure. We suggest users to turn on the function when receiver is
installed in aircraft body, thus they have no approach to receiver’s linking button.
3. Remote Control Relay
Remote control relay function helps users with long distance flight relay. It supports two transmitters at most.
How to Use Remote Control Relay Function
(1) Prepare two DA16 transmitters, mark them with 1 and 2;
(2) Please link transmitter 1 to receiver first, then turn on “Remote Control Relay” in “General Settings Relay”
menu; transmitter 1 is the slave transmitter;
(3) Then link transmitter 2 to receiver; transmitter is always the master transmitter even if you restart receiver
or transmitter.
Before using DA16 receiver, we suggest users to manually calibrate receiver telemetry voltage and aircraft
power telemetry voltage once.
Here are some preparing work before calibrating.
Power on receiver and transmitter;
Link receiver to transmitter.
Do not turn on automatic linking when you are using more than one pair of transmitter and receiver at
the same time.
Voltage Calibrating
