Foxtech DA16 Radio Control System
User Manual
©
2018 FOXTECH All Rights Reserved
30
H/W Set help users do advanced settings for DA16 transmitter’s LD dial (switch between Position / Speed
Mode) and S1 / S4 / S5 / S6 switches (switch between Self-locking / Self-return).
The Difference between LD Dial’s Position and Speed Mode
Position Mode
: LD channel value output depends on dial’s position. More dial angle changes, more
channel value output increases.
Speed Mode
: LD channel value output depends on dial’s rotating speed. Faster dial rotates, more channel
value output increases. Speed mode is usually used among aerial photography users to change gimbal
camera angle.
Steps to Set LD Dial
(1) In system settings menu, tap on “H / W Settings”, in screen it shows H / W settings menu;
(2) Tap on “Position / Speed” to switch LD’s working mode; in speed mode, you can tap on “+ / -” to
increase or decrease LD’s stepping value to change LD’s rotating speed.
How to Set S1 / S4 / S5 / S6 Switches
In H / W settings menu, select your requiring switch, tap on “Self-locking / Self-return” to switch its working
mode.
ExPort Stts
DA16 transmitter’s extending ports help users extend transmitter function to external hardware devices and
SDK. Currently DA16 transmitter supports Micro-USB, USB and 4-Pin Groove Port (DATA1 / DATA 2).
DA16 Transmitter Ports Function Assignment
Micro-USB: Charging, parameter adjustment, firmware upgrading and datalink output.
USB: Datalink output (only available for DA16 transmitter datalink version)
DATA1/DATA2: Firmware upgrading of DA16 receiver series, trainer mode and SDK.
Steps to Set DATA1 / DATA 2 Port
(1) In system settings menu, tap on “ExPort Stts”, in screen it shows extending ports settings menu;
(2) Select DATA1 / DATA 2 to switch function assignment (Transmitter / Receiver / GPS / SDK);
(3) In “Transmitter” mode, DATA1 / DATA2 is assigned for trainer mode, trainer
(4) Transmitter output and trainee transmitter input;
(5) In “Receiver” mode, DATA1 / DATA2 is assigned for upgrading DA16 receiver series firmware (for details
please refer to DA16 Receiver User Manual);
